Real-time flow monitoring in standalone mode
Learns flow by station and automatically responds to incorrect flow

Simple two-wire decoder installation
Up to 99 stations plus the ability to have remote sensors

Up to 6 two-wire paths of up to 15,000 feet/4.5 kilometers each
Economical wiring for the largest systems

Diagnostic output LEDs and electrical current display
Displays station activity and line status at a glance

Field programmable decoders with built-in surge protection
No complicated serial numbers or extra lightning devices

Easy modular upgrade to 2-way communication with central control
Simple plug-in modules upgrade ACC to hardwire, modem, or radio control

Programmable pump/master valve assignments
Run pumps and master valves via conventional or decoder outputs

6 fully-independent programs (plus 4 custom programs)
Standard programs each have separate day cycles and 10 start times, offering total flexibility for complex landscapes

Non-volatile 100-year memory
Program data is retained during power outages, no battery required

Multiple sensor hookups
Accommodate devices for weather and flow to provide automatic system shutoff in abnormal conditions

• ACC DECODER CONTROLLER MODELS
• 
  ACC-99D – 2-Wire Decoder Controller with 99 station capacity, wall mount metal cabinet
  ACC-99DPP – 2-Wire Decoder Controller with 99 station capacity, plastic pedestal
  ICD-100 – Single-station decoder with surge suppression and ground wire
  ICD-200 – Two-station decoder with surge suppression and ground wire
  ICD-400 – Four-station decoder with surge suppression and ground wire
  ICD-600 – Six-station decoder with surge suppression and ground wire
  ICD-SEN – Two input sensor decoder with surge suppression and ground wire
  IDWIRE1 – 14 AWG/1.6 mm dia. decoder wire (up to 10,000 ft./3 km)
  IDWIRE2 – 12 AWG/2mm dia. decoder wire (up to 15,000 ft./4.5 km)
  HFS – Hunter flow sensor, requires the use of an FCT-xxx
  ACC-PED – Metal Pedestal for use with ACC-99D
  
  DIMENSIONS
  • ACC-99D Cabinet : 12 3⁄8" H x 15 1/2" W x 6 7/16" D
  (31.4 cm H x 39.4 cm W x 16.4 cm D)
  • ACC-99D Metal Pedestal: 36 1⁄8" H x 15 1/2" W x 5" D
  (91.5 cm H x 39.4 cm W x 12.7 cm D)
  • ACC-99D Plastic Pedestal: 38 3⁄8" H x 21 9⁄16" W x 15 7⁄8" D
  (97.5 cm H x 54.6 cm W x 40.3 cm D)
  • Decoders:
  ICD-100, 200, ICD-SEN - 3 5⁄8" H* x 1 1/2" W x 1/2" D
  (92 mm H* x 38 mm W x 12.7 mm D)
  ICD-400, 600 - 3 5⁄8" H* x 1 3/4" W x 1 1/2" D
  (92 mm H* x 46 mm W x 38 mm D)
  • Wire leads (all) - 18" L, 18 AWG dia.
  (46 cm L, 1 mm dia.)
  *Not including wire leads.
  
  SPECIFICATIONS & FEATURES
  • Transformer Input: 120/230VAC, 50/60 Hz, 2A max at 120V, 1A max at 230V.
  • Transformer output: 24VAC, 4A, @ 120VAC
  • Decoder Line (path) output: 34V peak-to-peak
  • Decoder Power draw: 40 mA per active output
  • Solenoid capacity: 2 standard 24 VAC Hunter solenoids per output within 100 ft./33 m runs, up to 14 solenoids max simultaneous (includes dual P/MV outputs)
  • Wiring, Decoder to solenoid: standard pair 18 AWG/1 mm to 100 ft./33 m (twisted improves surge resistance)
  • 6 two-wire output paths to field decoders
  • Two-way confirmation of decoder activation
  • Two-way monitoring of sensor connections (ICD-SEN)
  • Diagnostic LEDs with line status, signal activity, decoder and status
  • Programmable decoder station IDs (from controller panel)
  
  ACC-99D Decoder Systems include all standard features of the ACC controller, including:
  • 6 automatic programs, with 4 custom manual (auxiliary) programs
  • Dual pump/master valve outputs programmable by station
  • 1 flow meter (diagnostics to station level) and up to 4 sensor inputs (programmable to program level)
  • Programmable overlap or SmartStack by program with simultaneous station groups.
  • Seasonal adjust, 0 to 300% in 1% increments by program
  • Flow learning mode by station with programmable alarm thresholds
  • Station run times up to 6 hours with programmable delay between stations (up to 4 hours)
  • Self-diagnostic circuit breaker skips shorted stations and continues watering
  • SmartPort® equipped for wireless remote control
  • Test program feature allows for quick system checks
  • IMMS 2.0 central system compatible
  • Upgrade to ET capability
  • Real-time Flow Monitoring capability built in, with actual flow histories (in GPM or metric) available when connected to Hunter HFS or other compatible flow meters.
  • Flow-learning mode by station, with station-level diagnostics and alarm shutdowns.
  • Easy Retrieve™ backup feature can restore schedules, run times, names and other settings to a saved setup
  
  
  
• SPECIFICATION GUIDE
  EXAMPLE: ACC - 99D - PED
  MODEL ACC	FEATURES 99D = 2-Wire Decoder Controller with 99 Station Capacity, Metal Cabinet 99DPP = 2-Wire Decoder Controller with 99 Station Capacity, Plastic Pedestal	OPTIONS USER INSTALLED PED = Optional Metal Pedestal
  ICD IDWIRE1 IDWIRE2	100 = Single-station Decoder with Surge Suppression and Ground Wire 200 = Two-station Decoder with Surge Suppression and Ground Wire 400 = Four-station Decoder with Surge Suppression and Ground Wire 600 = Six-station Decoder with Surge Suppression and Ground Wire SEN = Two Input Sensor Decoder with Surge Suppression and Ground Wire 14 Awg Decoder Wire (Up to 10,000 Ft./3km) 12 Awg Decoder Wire (Up to 15,000 Ft./4.5km
  ACC-COM	HWR = Hardwire Connection Communication Module for “Satellite” Installations POTS = Regular Dial-up Telephone (RJ-11) Connection Communication Module for “Satellite” Installations GSM = Cellular Connection Communication Module for “Satellite” Installations GSM-E = Cellular Connection Communication Module (Cell Phone & Antenna Included) for International “Satellite” Installations
  ACC-HWIM RAD3	Terminal for Hardwire Connections (In- and Outbound Wire) UHF Radio Communications Module (Antenna not Included)
  HFS	Hunter Flow Sensor, requires the use of an FCT-xxx tee fitting