Heavy-duty body and cap construction
Multi-thread buttress design withstands the harshest environments

Pressure activated, multi-function, no flow-by wiper seal
Easy to remove and clean; treated with UV inhibitors to ensure long life

Compatible with All Female Threaded Nozzles
Accepts adjustable, fixed and specialty nozzles from Hunter and all major brands

Optional factory-installed drain check valve for up to 10 feet elevation change
Eliminates landscape damage from flooding and erosion

Ratcheting riser for quick arc alignment
Make adjustments while sprinkler is operating

Heavy-duty spring
For positive retraction under any conditions

Innovative pop-top flush plug design
Allows limited flow permitting controlled directional flushing

1/2" standard side inlet on 6" and 12" models
Installation convenience for deep seated bodies

• Pro-Spray® MODELS
  PROS-00 – Shrub
  PROS-02 – 2" Pop-up (5 cm)
  PROS-03 – 3" Pop-up (7.5 cm)
  PROS-04 – 4" Pop-up (10 cm)
  PROS-06 – 6" Pop-up (15 cm)
  PROS-12 – 12" Pop-up (30 cm)
  
  DIMENSIONS
  • Overall height:
  PROS-02 – 4"(10 cm)
  PROS-03 – 5" (12.5 cm)s
  PROS-04 – 5 7⁄8" (15.5 cm)
  PROS-06 – 8 3/4" (22.5 cm)
  PROS-12 – 16 1⁄8" (41 cm)
  • 1/2" female inlet NPT
  • Exposed diameter: 2 1/4" (5.7 cm)
  
  OPERATING SPECIFICATIONS
  • Recommended pressure range: 15 to 70 PSI (1.0 to 4.8 bars; 103 to 482 kPa)
  • Flow-by: 0 at 10 PSI (.7 bars; 68 kPa) or greater; .1 GPM (0.02 m3/hr; 0.4 l/min) otherwise
  • Precipitation rates: approximately 1.5" (38 mm) per hour
  
  OPTIONS AVAILABLE
  • Factory-installed drain check valve for up to 10' (3 m) elevation change;
  “Check Valve” stamped on cap for easy ID
  • Field-installed drain check valve (part # 437400)
  • Field-installed black rubber cover (part # 469805)
  • Field-installed reclaimed water identification snapon cover (part # 469800)
  • Field-installed reclaimed water identification body cap (part # 458520),
  with “Check Valve” stamped on cap for easy ID (part # 458525)
  • Field-installed vandal-proof cap (part # PROS-VPC)
  
  
  
• SPECIFICATION GUIDE
  EXAMPLE: PROS - 04 - CV - 15H
  MODEL PROS = Pro-Spray	POP-UP HEIGHT 00 = Shrub 02 = 2" Pop-up 03 = 3" Pop-up 04 = 4" Pop-up 06 = 6" Pop-up 12 = 12" Pop-up	OPTIONS CV = Factory-Installed Drain Check Valve (Pop-up Models Only) CV-R = Factory-Installed Reclaimed Body Cap	NOZZLE SERIES 8 = 8 Series 10 = 10 Series 12 = 12 Series 15 = 15 Series 17 = 17 Series*	PATTERN A = Adjustable Q = Quarter-Circle H = Half-Circle F = Full-Circle

  Note: Bodies and nozzles sold separately. Also compatible with Hunter's bubbler and specialty