 |
 |
 |
|
XCZ-100-PRF
1" pre-assembled kit with in-line DV valve and Pressure Regulating Filter
This compact, factory assembled two-piece kit combines the 1” DV Valve with the 1” Pressure Regulating Filter to save installation time. The Pressure Regulating Filter is a 200 mesh (75 micron) manual filter that includes a 40 psi (2,8 bar) pressure regulator.
Specifications
- Flow: 3 to 15 GPM (0,19 to 0,95 l/s)
- Inlet Pressure: 20 to 120 psi (1,4 to 8,3 bar)
- Regulated Pressure: 40 psi (2,8 bar)
- Filtration: 200 mesh (75 micron)
- Connections: 1” inlet and outlet (NPT)
- Size: 10” (25 cm) overall length
Pressure Loss Chart
In order to supply 40 psi (2,8 bars) outlet pressure, additional pressure is needed at the inlet since there is some pressure loss from water flowing through the kit. The amount of pressure loss depends on the flowrate. The charts below list the minimum inlet pressure required to supply 40 psi (2,8 bars) of outlet pressure.
| Minimum Inlet Pressure for 40 psi Outlet Pressure |
| Flow GPM |
PSI |
| 3 |
42.9 |
| 5 |
44.1 |
| 8 |
46.9 |
| 10 |
48.5 |
| 15 |
55.5 |
Metric
| Minimum Inlet Pressure for 2,8 Bars Outlet Pressure |
| Flow l/h |
Flow l/s |
Bars |
| 681 |
0,19 |
3,0 |
| 1136 |
0,32 |
3,0 |
| 1817 |
0,50 |
3,2 |
| 2271 |
0,63 |
3,3 |
| 3407 |
0,95 |
3,8 |
|
|
|
 |
|
 |
|
|
|
