Super 800 Series

Series Overview

With an impressive feature set, this proven rotor provides versatility, easy adjustment and trouble-free operation for a wide range of medium to large
residential and light commercial applications.

Features

• Top arc indication for easy adjustments from 40°–360°
• 5" (127mm) pop-up height clears tall grasses
• Part- and full-circle arcs in one sprinkler offer convenience
• Continuous unidirectional rotation provides uniform coverage when set at 360°
• Smart Arc™ memory returns sprinkler to previously set arc if vandalized

• Application:

• With an impressive feature

• set, this proven rotor provides versatility,

• easy adjustment and trouble-free operation

• for a wide range of medium to large

• residential and light commercial

• applications.

• Super 800 Series

• Turf, ground cover, planting beds, slopes

• Radius: 28’–50’

• Flow rate: 0.50–10 GPM

• Pressure: 30–50 psi

• Super 800 Series

• All Models

• Radius:

• 28’–50’ (8,5–15,2m)

• Flow rate:

• 0.50–10 GPM

• (1,8–37,8 LPM)

• Recommended operating

• pressure range:

• 30–50 psi (2,0–3,5 Bar)

• Maximum operating

• pressure:

• 70 psi (4,7 Bar)

• Inlet:

• 3

• ⁄4" (20mm) NPT

• female-threaded

• Lawn Pop-up

• Pop-up to nozzle:

• 4

• 1⁄2" (115mm)

• Dimensions:

• Body diameter: 2

• 3⁄8"

• (60mm)

• Cap diameter: 2.9”

• (74mm)

• Height: 7.6” (193mm)

• Check valve (Optional):

• Maintains up to 6’ (1,8m)

• elevation change

• Shrub

• Height:

• 7

• 3⁄4" (197mm)

• High-pop

• Dimensions:

• Body diameter: 2

• 1⁄4"

• (70mm)

• Cap diameter: 3” (75mm)

• Height: 27” (686mm)

• S p e c i f y i n g I n f o rma t i o n

• S800

• XXX XX COM E

• Body Nozzles Optional Optional

• S—Shrub 50—0.50 30—3.0 COM—Check- E—Effluent

• 5P—5" Lawn Pop-up 75—0.75 40—4.0 O-Matic

• 12P—12" High-pop 10—1.0 60—6.0

• 20—2.0 80—8.0

• 25—2.5

• Example:

• A Super 800 Series Sprinkler with a 5" pop-up height,

• would be specified as:

• S8005P

• Operational Features

• • Top arc indication for easy

• adjustments from 40°–360°

• • 5" (127mm) pop-up height

• clears tall grasses and allows for

• conservation and less frequent

• mowing

• • Part- and full-circle arcs in one

• sprinkler offer convenience and

• reduce inventory requirements

• • Continuous unidirectional

• rotation provides uniform

• coverage when set at 360°

• • Smart Arc

• ™ memory returns

• sprinkler to previously set arc

• if vandalized

• • Pressure activated seal and

• robust trip mechanism for

• enhanced reliability

• • Standard rubber cover

• for safety

• • Effluent and check valve

• options—for safety in

• reclaimed water situations and

• to prevent low-head drainage

• • Five-year warranty

• Installation Features

• • Selection of body styles: pop,

• shrub and high pop—to

• satisfy varying installation

• requirements (such as slopes

• with shrub models)

• • Nozzle tree with 9 standard

• and 4 low-angle nozzles

• to cover varying flow

• requirements and different

• trajectories

• • Stainless steel radius adjustment

• screw allows up to 25% radius

• reduction

• • Trajectory: 26°

• High Pop

• Lawn

• Shrub

•  

Figure 1). The Super

800 key is used to pull up the riser, to remove the nozzle, to reduce the radius and

to adjust the arc (

Figure 2). Each use is described in the following instructions.

Figure 3), turn it

90

°, and pull up. Hold the riser in the pulled-up position.

Using the end of the key, turn the radius adjustment screw counterclockwise until

it clears the top of the nozzle (

Figure 4a).

To remove the nozzle, insert the key into the slot at the top of the nozzle, above

the nozzle number. Exert pressure laterally while pulling on the key to dislodge

and remove the nozzle (

Figure 4b).

To install a nozzle, press the nozzle into the nozzle socket. The nozzle number

should be visible and the nozzle prongs should be at 12 o

’clock. Turn the radius

adjustment screw clockwise to its desired location (

Figure 5) ensuring that it is in

a position to hold the nozzle in place even if radius reduction is not required.

°.

To find the left stop position, rotate

the nozzle turret clockwise (to the right) until it stops, then rotate the nozzle turret

all the way back to the left.

To increase the arc, insert the key into the arc adjustment slot, indicated by an

arrow in the center of the turret. Hold the turret in place while turning the tool

clockwise. Keep turning until the arrow points to the desired arc. The arrow will

point to the adjustable right stop. See

Figure 6.

When the rotor is set at 360

°, it will continuously rotate in a clockwise direction.

To decrease the arc, insert the key into the arc adjustment slot. Hold the turret in

place while turning the tool counter clockwise. Keep turning until the arrow points

to the desired arc. The arrow will point to the adjustable right stop.

To adjust the arc while the rotor is running, turn the turret gently in the direction

that it is spraying. Once the left stop has been located, follow the directions above

to increase or decrease the arc.

To line up the left stop with landscape features which define the left side of the

irrigated arc, simply turn the pop up housing or the shrub base and point the left

stop where the sprinkler should start spraying. You may also pull the pop up riser

up with the key and rotate the LOWER part of the riser until the left stop is at the

desired left stop position.

DO NOT rotate the TOP part of the riser.

Figure 7). It is not designed to be installed below grade. The shrub version is

mounted above grade.

The radius adjustment screw can be used to reduce the radius of throw by up to

25%. You should note that this does not reduce the flow of the nozzle.

The screen can be accessed through the bottom of the riser. Remove the cap of

the pop up version and lift the riser assembly out of the housing can. The shrub

version can be unscrewed from the base. If plugged, the screen can be removed,

cleaned, and re-inserted into the riser.

The Super 800 rotor has a universal stator which eliminates the need to regulate

the flow regardless of the nozzle used. There is a pre-installed check valve on the

Super 800 rotor. Use of the check valve will eliminate low head drainage after the

zone has run.