FEATURES

• 100% water tested

• 150 psi (10,3 bar) rating

• Unique “reverse fl ow” porting design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure providing zero

stress to prevent “stretching,” a common cause of valve failure

• Reverse fl ow design for water conservation in the event of failure

• Diaphragm’s self cleaning ports constantly fl ex, inhibiting sand and silt from blocking valve action

• Molded shock cone for smooth operation and reduction of water hammer

• Easy-to-use internal manual bleed lever; bleeds valve downstream; has stops for open and closed positions

• Marine-grade S20P solenoid with stainless steel actuator

• High-strength glass-fi lled nylon body and cover with ¼" stainless steel cover bolts and mating brass body inserts

• Non-rising fl ow control stem throttles valve from full open to closed position on fl ow control models

ELECTRICAL

• Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended

for all hookups